Polypropylene Film Capacitors
Metallized PolyPropylene (AC RATED)
- MP96R | Radial Box [details »]
- MP96D | Radial Epoxy Dipped [details »]
- MP96O | Axial Oval [details »]
- MP96 | Axial Round [details »]
- Series Wound construction (480VAC & 600VAC)
- Extended metallized film
- Very low losses
- High insulation resistance
- High stability of capacitance
- Negative T.C. of capacitance
- RoHS Compliant
- Power Factor Correction
- Motor run
- Filtering/networks
- Snubber circuits
- Switching power supplies
- Dielectric: Metallized Polypropylene film
- Electrodes: Vacuum-deposited aluminum
- Leads: Solid tinned copper leads
- Temperature Range:
-40°C to 70°C
With full rated voltage applied
Derate linearly to 50% rated voltage to 100°C - Capacitance Range: .01μf to 22μf
- Rated Voltages:
250VAC, 300VAC, 480VAC, 600VAC - Temperature Coefficient:
-200 (+50, -100) ppm/°C
- Dielectric Strength:
Terminal to terminal (60sec): 250VAC ~ 600VDC, 300VAC ~ 800VDC, 480VAC ~ 1300VDC, 600VAC ~ 2000VDC
Terminal to enclosure (2sec): 2000VAC (minimum) - Insulation Resistance at 25°C (Minimum IR):
≥100,000mΩ for C ≤ .33μf @ 100VDC - Time Constant at 25°C:
≥30,000mΩ x μf sec. for C > .33μf @ 100VDC - Test Voltage:
1.6 Vr for 2 sec. - Dissipation Factor at 25°C:
0.1% maximum at 1Khz
Capacitance ranges listed are for standard products. Custom applications are available for all STK Electronics series.