Polypropylene Film Capacitors

Metallized PolyPropylene (High Current)

alt
  • Non-inductive
  • High current: up to 9rms @ 85°C
  • High current terminations
  • Low ESR values
  • Heavy edge material
  • RoHS Compliant
  • Switching power supplies
  • High frequency transformer DC blocking
  • Input / Output filtering
  • Electrolytic replacement
  • Power Factor Correction circuits
  • Dielectric: Metallized Polypropylene
  • Electrodes: Vacuum-deposited aluminum
  • Leads: Tinned copper wire
  • Temperature Range: -40°C to 85°C
  • Capacitance Range: .10μf to 6μf
  • Rated Voltages:
    250VDC/160VAC, 440VDC/220VAC, 630VDC/250VAC
  • Temperature Coefficient:
    -300 ±100 ppm/°C
  • Dielectric Strength:
    1.5 x VR, for 60 sec. (Special test upon request)
  • Insulation Resistance at 25°C (Minimum IR):
    ≥ 100,000mΩ for C ≤ .5μf @ 100VDC
  • Time Constant at 25°C:
    ≥ 45,000mΩ x μf sec. for C > .5μf @ 100VDC

Capacitance ranges listed are for standard products. Custom applications are available for all STK Electronics series.

Dissipation Factor at 25°C:

KHZ C ≤ .1μf .1μf < C ≤ 1μf C > 1μf
1 0.3 x 10-3 0.4 x 10-3 0.7 x 10-3
10 0.5 x 10-3 0.5 x 10-3  

Max Pulse Rise Time V/ μs: (dv/dt)

L (in/mm) 250VDC 440VDC 630VDC
.75 / 19 410 480 500
.87 / 22 250 420 460
1.05 / 26.5 230 380 400
1.30 / 33 190 290 320
1.6 / 41 150 240 260
2.10 / 52 125 210 240

Maximum RMS Current: (Amps)

L (in/mm) 250VDC 440VDC 630VDC
.75 / 19 3.5 3.5 3.5
.87 / 22 5 5 5
1.05 / 26.5 5.5 5.5 5.5
1.30 / 33 7.5 7.5 7.5
1.6 / 41 8.5 8.5 8.5
2.10 / 52 9 9 9

Maximum ESR:

L (in/mm) 250VDC 440VDC 630VDC
.75 / 19 30 40 40
.87 / 22 20 30 30
1.05 / 26.5 18 24 20
1.30 / 33 14 14 16
1.6 / 41 11 12 12
2.10 / 52 10 11 11

Maximum Amps: (Peak)

L (in/mm) 250VDC 440VDC 630VDC
.75 / 19 85 160 120
.87 / 22 250 250 200
1.05 / 26.5 370 320 270
1.30 / 33 580 520 420
1.6 / 41 670 620 520
2.10 / 52 760 720 620

 


©2008 Pelco Component Technologies